Hawke 1 inch 1 Piece Adjustable – 3/8 or 11mm Droop Compensating 1 inch Reach forward Scope Mount

To get the most out of your optical set-up it is always recommended to have your riflescope optically centred. When zeroing at close or very far distances it’s common for the turrets to reach the end of their adjustment. An option is to pack the mounts with additional material to raise the rear (or front) of the scope. By doing this you risk damaging the scope tube. The correct solution is to use the new Hawke Adjustable Mounts. They feature a turn dial that moves both rings at the same time.Once the riflescope is in the approximate zero zone the mount can then be locked secure using the hex key provided. A true zero can be achieved using the riflescope turrets. All mounts are anodised in matte black and feature a double screw ring clamp design Key Features: Turn dial moves both rings in unison
Double Torx screws
Internal cushion tape (prevents scope damage)
1″ Scope Tube
1″ Reach Forward configuration
Reversible dovetail clamp: 3/8″ or 11mm Rail

Additional Features: Rounded edges prevent scope damage
Precision engineered from high grade aluminium
Anodized Matt Black


More Information HERE