DNZ Reaper 1 Piece Tikka T3 Right or Left hand Scope Ring Mount

Available in 1 inch or 30mm Guaranteed with DNZ Reaper Scope Mounts - Eliminates or reduces scope damage from tightening rings
– Ring placment allows for extra eye relief adjustment
– Up to 4 times more thread length in rings – Full 1/2″
– Made of billit Aluminium – Tempered 6061t6
– Grade 8 hardened steel scews
– Available in black or silver Technical Information - Machined one piece for extreme accuracy
– No moving parts between firearm and scope
– Lightweight – Approx 1/3 the weight of steel
– Fast installation and requires no special tools
– Eliminated need for windage screws
– 100% perfect alingment – No lapping / Shimming Traditional mounting methods require 10 minutes to perform 9 Steps to mount a scope. With DNZ it only take 4 steps equating to 3 minutes of your time. Choosing the right mounts for you ! Low mounts will fit plain bell 40MM objective scopes and some 44MM objective scopes. A PLAIN BELL scope is a scope that does not have an adjustment ring on the front end of the scope. If it has an adjustable objective it will be larger in diameter and you may need a taller mount. · If the scope has an Adjustable Objective on the 40MM end you may need the medium. · Medium mounts fit all 44MM objective scopes and most 50MM plain bell objective scopes. · High mounts fit all 50MM objective scopes and most 56MM objective scopes. All dimensions from top of receiver or barrel to center of 1″ or 30MM bore. · *Low mounts are .920 to 1.000 depends on firearm. · *Medium mounts are 1.045 to 1.125 depends on firearm. · *High mounts are 1.170 to 1.250 depends on firearm
Mount Height Low Medium Tube Diameter 1 inch 30 mm

More Information HERE